19632

RM 037 AUTOMATIC 537.04.91-1

Inquire for price

currently unavailable
Shop Richard Mille

Product Details Description

Richard Mille RM 037 AUTOMATIC 537.04.91-1 Watch: This watch features skeletonized automatic movement with hours, minutes, new adjustable rotor geometry, oversize date and function selector.

About Richard Mille

Herald at their intial release in 2001 as a break from the past and a new direction of horology, the wristwatches of Richard Mille were from their very inception, extraordinary and uncompromising.

Product Specifications

TECHNICAL SPECIFICATIONS OF THE RICHARD MILLE RM 037 AND THE CALIBER CRMA1

Available in titanium, red gold and white gold.

CALIBER CRMA1: skeletonized automatic movement with hours, minutes, adjustable rotor geometry, oversize date and function selector.

Dimensions: 52.20 mm x 34.40 mm x 12.50 mm

MAIN FEATURES

POWER RESERVE
Circa 50 hours.

BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM
Micro-blasted grade 5 titanium with electroplasma treatment gives great rigidity to the baseplate, as well as precise surface flatness which is essential for the perfect functioning of the gear train. Bridges are also in grade 5 titanium, microblasted and electroplasma treatment. The skeletonized baseplate and  the bridges were subjected to separate and extensive validation tests to ensure optimal strength  requirements.

ROTOR WITH VARIABLE GEOMETRY
• Heavy external outside edge and heavy edge ring in ARCAP
• Weight segment in heavy metal
• Ceramic ball bearings
• Automatic winding system OneWay® with ball bearings
• Bidirectional winding system

This rotor with variable inertia has been incorporated into the RM 037 caliber as it allows the rotor to be set according to the owner’s activity level. The setting is modified by adjusting the 2 weights which can be slid into the correct position and fixed in place by spline screws. Inertia of the movement is increased when the 2 weights are closer to each other and the barrel then rewinds more quickly. If the weights are positioned to the extremities of the rotor, the inertia is decreased. By consequence, the  barrel winds more slowly.

FREE SPRUNG BALANCE WITH VARIABLE INERTIA
It guarantees greater reliability when subjected to shock and also during movement assembly and disassembly, hence better chronometric results over time. The regulator index is eliminated and a more accurate and repeatable adjustment is possible thanks to 4 small adjustable weights located directly on the balance.

FAST ROTATING BARREL (5 hours per revolution instead of 7.5 hours)
This type of barrel has the following advantages:
• The phenomenon of periodic internal mainspring adhesion is significantly diminished, thereby
increasing performance,
• Provision of an excellent mainspring delta curve with an ideal power reserve/performance and
regularity ratio.

NEWLY DEVELOPED GEAR TEETH PROFILE
The entire going train of the watch, the primary transmitter of power throughout the movement, utilizes  a special profile for the teeth of the wheels. Developed specifically for the RM caliber CRMA1, the wheels use a 20Ë¿ pressure angle. This system equalizes any discrepancies that might arise between the axles of each wheel, for instance during thermal changes and normal use, and promotes an excellent transmission of torque to the balance wheel, thus supporting excellent chronometric characteristics.

OVERSIZE DATE DISPLAY
Semi-instantaneous, horizontally placed under 12 o’clock, functioning via two skeletonized calendar discs over a white field. The date can be easily corrected via the pusher located at 10 o’clock.

FUNCTION SELECTOR
A push-button located at 4 o’clock allows one to select the winding, neutral and hand setting functions with a simple push in a manner similar to a car's gearbox. An aperture located at 4 o’clock shows the function selected : W (winding) - N (neutral) - H (hand setting).

NEWLY DESIGNED FLAT HEAD MOVEMENT SCREWS IN GRADE 5 TITANIUM
Richard Mille has utilized the best of modern micro mechanical engineering in the use of special flathead screws in the caliber CRMA1. These unusual screws with their 6 holed heads are based upon the snake- eye screw concept principally used in the assembly of parts that require extremely exact torque to be applied. For specific movement parts, these screws provide secure fixation that still allows for rotational movement of the date and function selectors.

SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE MOVEMENT
This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well. Each individual screw represents more than 20 different operations before it is ready for assembly into the movement.

OTHERS CHARACTHERISTICS
• Movement dimensions: 28.00 x 22.90 mm
• Thickness: 4.82 mm
• Number of jewels: 25
• Balance: CuBe, 4 arms, 4 setting screws, inertia moment 7.5 mg.cm2, angle of lift 50º
• Frequency: 28,800 vph (4 Hz)
• Balance spring: AK3
• Shock protection: Incabloc 908.22.211.100 (transparent)
• Escapement wheel jewels: Rubifix (transparent)

WATCHCASE
The design and execution of the watch demonstrates a complete conceptual approach to the  movement, case and dial. As a result, everything has been constructed according to extremely rigorous  specifications, rather like the analytical engineering methods used in the design of Formula 1 where the chassis and the engine are developed in complete harmony. 44 different stamping operations are required for the three main components of the case (bezel, caseband and case back). The machine tooling process requires 2 days of adjustment for the bezel, 2 days for the caseband and 2 days for the case back. The empty case requires more than 255 tooling operations and more than 5 hours of glazing and polishing in the final stage. The complex shape of the case is obtained thanks to a 5 axis machine.On each case, the “Richard Mille” engraving on the back and situated on the inside curve requires 45 minutes. The tripartite case is water resistant to 50 meters, ensured by 2 Nitril O-ring seals. The case is assembled with 20 Spline screws in grade 5 titanium and abrasion resistant washers in steel 316L.

NEW PATENTED STEM-CROWN CONSTRUCTION
Created from grade 5 titanium, red gold or white gold, with seal O-ring and collar in Alcryn, this newly designed crown allows the integrity of the movement to be fully guaranteed and protected from external influences, since it does not use a classical crown attachment going into the depth of the movement’s heart. The result is that the crown is virtually impossible to dislodge and yet it is easily inserted and removed under the skillful hands of the watchmaker when needed; a typical view towards longevity that typifies the brand’s philosophy.

SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE CASE
This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.

UPPER FLANGE
In carbon fiber; index points filled with approved luminous material.

DIAL
In sapphire (thickness: 0.80 mm) with anti-glare treatment (2 sides), protected by 8 silicon braces inserted in the upper and lower grooves. Laser-engraved numbers

CRYSTAL
• Bezel side: in sapphire (1800 Vickers) with anti-glare treatment (2 sides).
• Thickness: 1.30 mm
• Case back: in sapphire with anti-glare treatment (2 sides)
• Thickness: at the center 0.95 mm and outer edges 1.66 mm

FINISHING

MOVEMENT
• Microblasted anglage
• Microblasted milled section
• Microblasted sinks
• Electroplasma treatment for the baseplate and the bridges

STEEL PARTS
• Satin finished surfaces
• Anglage hand polished
• Hand polished sinks
• Burnished sections

PROFILE-TURNING
• Lapped and polished ends
• Burnished pivots
• Post faces polished

GEAR TRAIN
• Concave chamfering with a diamond tool
• Diamond polished angles
• Circular finished faces
• Rhodium-plating (before cutting the teeth)

 

Have a quick question or comment?

Receive Updates from Trusted