RM 019 TOURBILLON 519.064.94
Richard Mille RM 019 TOURBILLON 519.064.94 Watch: This watch features manual tourbillon movement with hours, minutes and power reserve.
Herald at their intial release in 2001 as a break from the past and a new direction of horology, the wristwatches of Richard Mille were from their very inception, extraordinary and uncompromising.
TECHNICAL SPECIFICATIONS OF THE RICHARD MILLE TOURBILLON RM 019
CALIBER RM019: manual winding tourbillon movement with hours, minutes and power reserve.
Dimensions: length 45 mm x 38.30 mm x 12.25 mm
MAIN FEATURES
(MANY OF WHICH ARE MAJOR TECHNICAL INNOVATIONS)
POWER RESERVE
48 hours. This is indicated utilizing a newly designed differential power reserve system, with a red line on a moving disc placed between 10 and 11 o’clock.
BLACK ONYX BASEPLATE
Onyx is a variety of cryptocrystalline quartz chalcedony composed of silicium dioxide, (SiO2). The variety with rectilinear black and white parallel stripes is part of the agate family; whereas the fully black type is known as Black Onyx. A gemstone able to deflect and channel harmful energy towards the Earth, it provides stability. For this reason, Black Onyx is considered a stone of protection against negative thoughts, as well being the stone of equilibrium and inspiration.
VARIABLE INERTIA, FREE SPRUNG BALANCE
The free-sprung balance gives better reliability in the event of shocks, movement assembly and disassembly, and also guarantees better chronometric results over an extended period of time.
BARREL PAWL WITH PROGRESSIVE RECOIL
This device permits an appreciable winding gain (circa 20 %), especially during the start of winding. It also aids in the even distribution of the mainspring’s internal tension.
OTHER FEATURES
• Movement dimensions: 30.20 x 28.60 mm
• Thickness: 4.97 mm
• Tourbillon diameter: 12.30 mm
• Balance wheel diameter: 9.12 mm
• Number of jewels: 21
• Balance: GLUCYDUR, 2 arms, 4 setting screws, inertia moment 10 mg.cm2, angle of lift 53º
• Frequency: 21,600 vph (3 Hz)
• Balance spring: ELINVAR by NIVAROX
• Shock protection: KIF ELASTOR KE 160 B28
• Jewels set in white gold chatons
• Barrel shaft in nickel-free chronifer (DIN x 46 Cr 13 + S) with the following characteristics:
• stainless- antimagnetic- suitable for tempering
FINISHING
MOVEMENT
• Anglage and polishing by hand (excluding Onyx and black treated parts)
• Locking sections hand polished
• Sapphire blasted milled sections
• Lapped and polished contact points
• Burnished pivots
• PVD treatment (excluding Onyx)
STEEL PARTS
• Sapphire blasted surfaces
• Satin finished surfaces
• Anglage and polishing by hand
• Burnished sections
GEAR WHEELS
• Concave chamfering with a diamond tool
• Circular finished faces
• Gilded (before cutting the teeth)
• Minimum correction applied to the wheels in order to preserve geometry and performance