22633

RM 008-V2 TOURBILLON SPLIT SECONDS CHRONOGRAPH 507.45.91/A

Inquire for price

currently unavailable
Shop Richard Mille

Product Details Description

Richard Mille RM 008-V2 CHRONOGRAPH 507.45.91/A Watch: This watch features manual winding tourbillon movement with hours, minutes, chronograph, split seconds, power reserve, torque and function indicator.

About Richard Mille

Herald at their intial release in 2001 as a break from the past and a new direction of horology, the wristwatches of Richard Mille were from their very inception, extraordinary and uncompromising.

Product Specifications

TECHNICAL SPECIFICATION OF THE TOURBILLON SPLIT SECONDS CHRONOGRAPH RICHARD MILLE RM 008-V2

For the first time in watchmaking history and after years of research and development, a movement baseplate in carbon nanofiber has been created. This innovation was first tested with great success on the RM 006, an experimental model. The technical results were remarkable and this led to the extended use of carbon nanofiber in the RM tourbillon range, as well as in the split seconds chronographs. Progress in this important area of development has now opened up a new era in watchmaking.

CALIBER RM 008-V2: Manual winding tourbillon movement with hours, minutes, chronograph, split seconds, power reserve, torque indicator, function indicator.

Dimensions: Length 48 mm x 39.70 mm (widest point) x 14.95 mm (thickest area)

MAIN FEATURES
(MANY OF WHICH ARE MAJOR TECHNICAL INNOVATIONS)

POWER RESERVE
70 hours (numerical indications to the left of the barrel)

CHRONOGRAPH (Column wheel in titanium)
The modern architecture of this movement has allowed for the consistent and rational arrangement of its constituent parts, avoiding unnecessary superimpositions and permitting the best possible use of the functions with technical solutions. For example, research was conducted into the geometrical design of the column wheel that controls the different levers to ensure the perfect, long-term simultaneity of the functions, a feature that is essential for a high performance chronometer. This design was implemented in order to achieve a high degree of continuity of the settings with an unfailing repeatability of the functions.

Operation: The user can start or stop the chronograph function via the pusher located on the lower left at 8 o’clock. The hands are reset by pressing another pusher located on the upper left at 10 o’clock.

SPLIT SECONDS MECHANISM with improved performance
One of the new characteristics developed for the RM 008-V2 is the virtually complete elimination of initial jumping in the chronograph seconds hand. A great number of studies led to the design and manufacture of gear wheels and levers in titanium, thus reducing inertia. Moreover, the development of a new generation of split seconds components meant that energy consumption could be lowered by approximately 50% by reducing friction on the spindle, as well as eliminating the jumps on stopping, thanks in particular to research that focused on the working of the split seconds arms.

Operation: simply by pressing the pusher on the right (at 4 o’clock), the user can stop the split seconds hand in order to read an intermediate time while the chronograph is engaged. Pressing the pusher again allows the split seconds hand to rejoin the chronograph hand.

TORQUE INDICATOR
Supplies information about the tension of the mainspring, and allows the optimalization of the chronometer function of the movement. Below 53 dNmm, the spring is considered to be too slack, while above 65 dNmm, the excessive spring tension can adversely affect the mechanism’s operation, or else actually endanger it. These indications appear on the numerical zone to the right of the barrel.

BALANCE WHEEL WITH VARIABLE INERTIA
This type of balance wheel, which represents the ultimate in innovation, guarantees greater reliability when subjected to shock and also during assembly and dismantling of the movement, thus achieving better chronometric results over time. The index is eliminated, thereby allowing a more precise and repeatable adjustment.

FAST ROTATING BARREL (6 hours per revolution instead of 7,5)
This type of barrel provides the following advantages:
• The phenomenon of periodic internal mainspring adhesion is significantly diminished,
thereby increasing performance;
• Provision of an excellent mainspring delta curve with an ideal power reserve/performance
and regularity ratio.

BARREL PAWL WITH PROGRESSIVE RECOIL
This device permits an appreciable winding gain (circa 20%), especially during the start of winding. It also aids in the even distribution of the mainspring’s internal tension.

BALANCE SPRING
Invented by A.L. Breguet in the 18th, perfected and codified by Edouard Phillips in the 19th, the specially calculated shape of the Breguet/Phillips balance spring provides excellent chronometric results in tourbillon escapements.

ESCAPEMENT
New in-line escapement design, aimed at reducing friction.

CLOSURE OF THE BARREL COVER USING EXCENTRIC SCREWS
This development is again part of the intention to make servicing easy, logical, and of a very high mechanical standard.

SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.

TEETH OF BARREL AND THIRD-WHEEL PINION WITH CENTRAL INVOLUTE PROFILE
The wheel with a central developing profile and a pressure angle of 20° promotes rolling movement more effectively, compensates differences between centers, ensures excellent torque transmission and a distinct improvement in performance.

OTHER FEATURES
• CENTER BRIDGE: in titanium
• MOVEMENT DIMENSIONS: 30.20 x 28.60 mm
• THICKNESS: 8.90 mm
• TOURBILLON DIAMETER: 12.30 mm
• DIAMETER OF THE BALANCE WHEEL: 10 mm
• NUMBER OF JEWELS: 38
• BALANCE WHEEL: in GLUCYDUR, 2 arms, 4 adjusting screws
• MOMENT OF INERTIA: 10 mg/cm2, lever angle 53°
• FREQUENCY: 21,600 vph (3 Hz)
• BALANCE SPRING: ELINVAR by Nivarox
• SHOCK RESISTANCE: KIF Elastor KE 160 B28
• BARREL SHAFT: in chronifer without nickel (DIN x 46 Cr 13 + S), which has the following
• characteristics: non-oxidizable – antimagnetic – hardened.

FINISHING

MOVEMENT
• Anglage and polishing by hand
• Locking sections hand polished
• Sapphire blasted milled sections
• Lapped and polished contact points
• Burnished pivots

STEEL PARTS
• Sapphire blasted surfaces
• Anglage and polishing by hand

GEAR WHEELS
• Concave chamfering with a diamond tool
• Circular finished faces
• Gilded (before cutting the teeth)
• Minimum correction applied to the wheels in order to preserve geometry and performance.

Have a quick question or comment?

Receive Updates from Trusted